Individual swivel cam cleat.

Internal shock cord recoils this righting line automatically. Made from 1/2" hollow braid line with internal shockcord. It requires no blocks or shackles. Installs in minutes without tools. Also functions as crew safety line. Our best selling righting...

Pair of tiller connectors for Hobie Cat rudder system including the Hobie 16, Hobie 14, Hobie 17, and Hobie 18. This is the most common tiller connector kit. Tiller connector kit for connecting two tillers to a crossbar Use on Hobie 14, Hobie 16, Hobie...

Standard fiberglass racing rudder blade for the ISCA / Sunfish sailboat. Designed for the active racer and standard on all ISCA - Race sailboats from Zim Sailing! ISCA Rudder Fiberglass Construction Zim Sailing Part # 48108   This is an...

3/16 inch diameter clevis pin with a 1/2 inch grip length (distance between end of pin and hole for ring ding) from Hobie Cat. Made from stainless steel and sold individually. Pin Diameter (A) is 3/16 in (5 mm) Pin Grip Length (B) is 1/2 in (12 mm) Sold...

3/16 inch by 1/2 inch pop rivet from Hobie Cat. 3/16 inch diameter. 1/2 inch length. Applications: Hobie Wave Mast Step Fitting - 4x Rivets   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

The Jamaica Tiller Extension is the same as the popular Deluxe tiller extension is built from black anodized aluminum. The extension comes with a comfortable and sylish foam grip and a releasable universal with a fiber core. Black anodized aluminum...

This cassette plug is designed specifically for Hobie Pro Angler 180 kayaks. It is designed to stop splashes and any gear from falling through the opening when the Mirage Drive is not being used. The cassette plug is not watertight by design. This allows...

Standard Optimist tiller is built with two rectangular aluminum tubes which are mounted together. includes all fittings, bolts, nuts, and washers needed for installation. Suitable for all Opti rudder blades Includes all necessary parts Official...

Replacement bottom mount bracket for Hobie sidekick.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Chain plate for Hobie 14 turbo jib pack. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Replacement shockcord assembly for Hobie kayak pole holder.

This is the block we include in our basic trap rig kits. No need to cut wires to install this block. Simply remove the clevis pin that acts as the sheave axle, slide the sheave out of the frame, place the frame through the trap wire thimble and reinstall...

Drop this small teflon disc into the mast hole to help absorb any grit. Take it out regularly to clean off the grit. Helps to prevent wear to the mast step, a critical area on the Laser. Teflon disc for Laser mast step. Prevents premature wear of...

These spreader airfoils are aerodynamically shaped to hold the shrouds. Sold in a set of 2 spreaders and designed for both Club 420 and FJ masts. 16 inch long Aluminum construction Works on both Club 420 and FJ masts for LP and Zim boats Sold as a set...

Mast base assembly for the Hobie 14.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts