Reefing hook used to secure the tack of the RS Quest Mainsail. Used in reefing the mainsail. Attaches to the gooseneck whose part number is 509-081-01.

Pair of mast head shims and 8 rivets used to secure them to the mast for the RS Quest. Shims serve as the anchor surface for attaching the masthead float brackets, whose part number is RSM-SP-911.

Mast Foot/Plug for the RS Quest. Includes upgraded pivot pin. Connects the bottom of the RS Quest mast to the mast step, whose part number is QUE-HF-200.

Pivot Pin for the RS Quest Mast Step. Use with RS Quest Mast Plug/Foot, whose part number is QUE-SP-904.

Mast Step for the RS Quest. Attaches to the Beam Assembly using 2x rivets. The part numbers for the Beam Assembly and rivets are QUE-HF-105 and FIX-R64-M18, respectively.

Kit for upgrading the RS Quest Mainsheet Base to a Swivel Base with cam cleat. The kit includes the 4x screws and cable ties needed to install the upgrade. This kit can also be used on the RS Toura. Instructions for installation

Handles which attach to the leading edge of the chines on the under (water) side of the RS Quest hull and RS Zest Hull. Attach using 2x screws whose part number is FIX-B5-C20. Can be used to help lift the boat when it is upside down. Also provide a wear...

Center Hatch for the RS Quest Foredeck. Requires O-Ring and 8x screws to install. The part numbers for the o-ring and screws are A.638 and FIX-S8-P02, respectively.

Transom drain assembly for the RS Quest. Flap allows water to freely drain out the transom.

Rubbing plate/gasket retainer for the RS Quest and RS Zest centerboard case. Used on the under (water) side of the RS Quest centerboard case to secure the centerboard gasket. Helps to stabilize the daggerboard. Secured outward of the centerboard gasket...

Gasket between the hull and the rubbing plate on the under (water) side of the RS Quest and RS Zest centerboard case. Use on on each side of the case opening. Secured under the rubbing plate using 6x screws. Made of 2000 sail cloth. Also used on the RS...

Deck plate for the RS Quest and RS Zest Centerboard Case. Use one on each side of the case to secure the centerboard shockcords. Each plate has two holes for adjusting the centerboard friction tubes (which help to hold the centerboard in place). Also...

Set of 4 battens used in the RS Quest Mainsail.

Selden Tiller Extension Universal Joint. Used to attach Selden Tiller Extensions.

Transom plate with rudder retaining clip. Used for attaching the rudder head to the back of the boat on the RS Quba, RS Feva, RS Vareo, and RS Vision.This item does not include fitting screws.

Seasure flexible screw down universal joint used on the RS Teras, RS Qubas, and RS Fevas that use the Seasure rudder head, and on the RS Vision in all forms. Also used on the RS2000.