Laser mainsheet pre cut from 7mm Bzz line. This is one of our favorite line options, with low stretch and a great feel in the hand. Line: 7mm Bzz Length: 44 Feet

6mm Rooster Laser Mainsheet pre cut to our recommended length of 44 feet. This is one of our most popular mainsheet options for light air sailing. Line: 6mm Rooster Length: 44 feet

The Laser daggerboard bungee helps keep your board in place while sailing. Pre cut to our recommened length for easy upgrade or replacement. Line: 8mm Shockcord Length: 8 Feet

Use this pre cut section of shockcord to help keep your Laser hiking strap up and off the cockpit floor. Line: 6mm Shockcord Length: 3 Feet

The Laser daggerboard clip line is used to attach a plastic clip from the daggerboard bungee to the daggerboard itself. Line: 4mm Robline Sirius 500 Length: 2 Feet (Quantity 1 = 2 Foot Section of Line) Typically cut from Blue/Silver spool but color may...

Keep your Laser sailboat secure to the dolly or dock with a floating bowline, pre cut to our recommended length of 10 feet. Line: 8mm PolyPro Length: 10 Feet

Downhaul line for the Laser rudder, pre-cut from 4mm Robline Sirius line for your convenience to 4 feet. Line: 4mm Robline Sirius 500 Length: 4 feet (Quantity 1 = 4 foot section of line) Typically cut from Red/Silver spool but color may vary Looking...

The Laser Outhaul Dangle Line is designed to secure your outhaul blocks around the lower mast section at the gooseneck fitting. Use on boats with upgraded Outhual and Cunningham systems. Line: 4mm Robline Sirius 500 Length: 2 feet (Quantity 1 = 2 foot...

Laser mast tie down line. Use this little section of line to prevent your mast from coming out in the event of capsize, securing it around the deck blocks and up over the vang tang. Helps avoid expensive repairs! Line: 3mm Robline Dinghy Control Color:...

Hiking strap adjuster line for the Laser. Use this line along with a bungee to keep your hiking strap in place and properly adjusted for maximum performance. Line: 5mm Robline Sirius 500 line Length: 3 feet (Quantity 1 = 3 foot length) Typically cut...

Spectra line for the Laser clew tie. This line secures the clew of your sail to the boom at the back of the boat. Pre cut to our recommended length. Line: 3mm Dyneema Length: 2 feet

This no stretch line is perfect for the Laser Traveler, pre cut to the perfect length for easy rigging. Line: 5mm Spectra Length: 11 feet

These 12 inch die-cut sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any...

These 12" digital sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any reason...

These 9" die-cut sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any reason...

These 9 inch digital sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any...