This shackle is primarily used to attach the jib halyard block to the mast hounds assembly. Includes Clevis Pin and Ring

29er mainsheet line pre cut from the high performance 7mm Dinghy Sheet XL line to our recommended length for easy upgrade to your rigging. Line: 7mm Dinghy Sheet XL Length: 27 feet

420 hiking strap center tiedown line. Order four of these to complete your hiking strap tie ins. Line: 5mm Robline Sirius 500 line Length: 1.5 feet (Quantity 1 = 1.5 foot length) Typically cut from black/silver spool, but exact color may vary Looking...

Tasar Outhaul Slide attaches to the sail and fits the boom track Big slug for smooth action Stainless steel bail makes sail attachment simple Molded in weld gives maximum strength

22mm Micro Cheek Block from Harken. 22mm Mount a deck or similar Made by Harken

This heavy duty bail is riveted to the boom in three different locations and is used for attachment points for boom blocks and the vang on 420, FJ, and V15. Heavy Duty Large diameter Zim Part # 20214 / Laser Performance Part # 90409  

Great little helpers for quick rudder removal. Forget the aggravation of straightening those cotter pins! A definite plus for trailering. Stainless Steel. Safety pin style.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides...

Take the hassle out of rigging and de-rigging your boat. Replace 3/16" and 1/4" clevis pins that use ring dings with easy-to-use push button pins. These "quick pins"퉌 are usable in a variety of places on your boat and will not work free by...

The Opti bridle ring provides a solid attachment point for the clip at the end of the mainsheet. The ring sits in the center of the bridle to keep the mainsheet centered. Stainless Steel 5/8 inch diameter Standard for Optimist rigs

Jib Tack fast pin used to attach Jib to bow plate on FJ, Club 420, and V 15 sailboats. Stainless Steel construction Secure under load Easy to secure to bow

Upper sleeve for Tasar mast assembly.

Replacement vang tang for the Laser® sailboat. This stainless steel vang tang rivets to the lower mast and provides an attachment point for the lower boom vang block. Not class legal for racing but ideal for training or recreational use. Lower vang...

This Optimist pintle set includes both the long and short pintle to bolt to the opti rudder blade. Stainless steel construction. Includes upper and lower pintle. Works with any Optimist sailboat.

Compression batten for the top of a FJ mainsail. This is compatible with first generation class-legal sails that have a velcro strap to secure the top batten, as opposed to the batten being sewn-in. Original equipment for all FJ sailboats. Zim Part #...

The 40mm boom jaw is designed to fit in larger Opti booms, most commonly the BlackGold 40mm boom. Provides a snug fit against Opti mast and a firm seal to keep water out of the boom. Fits 40mm racing booms Compatible with all masts

Standard 1/8 inch diameter shroud for Club 420 sailboats. Original equipment on new boats and a replacement for existing shrouds on Zim and LaserPerformance boats. Stainless steel 1/8 inch wire Approximately 13' 5" long Class legal for Club 420...