The Laser / ILCA Mast Wear Strips are made of thin strips of teflon. They are used to reduce the friction between the Laser / ILCA mast and the step. Mount one at the bottom end of your mast and one just below the deck line. 1 mm...

This nut is a replacement nut for the adjusting nut in the Opti mast step. The nut, when rotated in either direction, controls the rake of the mast. Fits all standard Opti mast steps

Sail tie set includes Vectran cored lines for the mast and boom. All ties are double length to make tying them easy. 5 corner ties and 14 standard ties. Vectran line Double length for easy tying Corner ties: 3mm Sail ties:1.2mm

The Tasar Traveler Track is a custom bent Ronstan track that mounts to the thwart. Please contact us for information about ordering. Black anodized aluminum Ronstan Series-19 track profile Track Width: 20mm Track Height: 23mm Track Length: 97...

Vectran is super low stretch line. This 4mm diameter version is great for all sorts of applications like Opti controls and Laser travelers and comes in a handy 39 foot mini spool. Vectran material. 4 mm diameter. 12 meter / 39 foot length.

Masthead assembly mounts to the top of the mast on all Club 420, FJ, and V-15 sailboats and includes sheaves for running main halyard line. Strong casting design. Integrated protection for two sheaves. Works on all Club 420, FJ, and V-15 sailboat...

This stainless steel eyestrap provides the attachment point for the boom blocks on the 420, FJ, V15, and Laser. Original Equipment Stainless Steel 40mm Hole Spacing 19mm Eyestrap Height

The fine tune stay adjuster provides for a quick and easy way to adjust stay tensions. It greatly reduces the risk of losing the stay when adjusting rig tension. 316 stainless steel Pin - 3/16 inch Increment Length - 5/32 in. Qty. Adjustment Settings -...

Starboard (right) corner casting for the rear crossbar of the Hobie 14 and 16. Anodized aluminum alloy. Fits Hobie 16 and Hobie 14   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Standard Getaway trampoline in Turquoise from Hobie Cat. Standard two piece tramp in heavy duty mesh that doesn't puddle. Includes heat welded seams that last much longer than any stitched seam tramp. Manufactured by Hobie Cat and designed to work with...

Replacement rudder lift stop for Laser sailboats and ILCA dinghies. This stainless steel tang keeps your rudder in place during a capsize and is commonly installed between the two gudgeons, with the tab racing down. Stainless steel Installed in line...

Take the hassle out of rigging and de-rigging your boat. Replace 3/16 inch and 1/4 inch clevis pins that use ring dings with easy-to-use push button pins. These quick pins are usable in a variety of places on your boat and will not work free by...

Lower gudgeon for the 29er transom. This is the old style for pre 2020 boats with old rudder stock style. Lower and upper gudgeons sold separately Manufactured by Ovington Boats

The vang wedge allows for the appropriate cleating angle for the split lead Tasar vang Newly redesigned in 2009 Made from solid delrin Class legal

40mm Carbo Fiddle Block from Harken. 40mm Fiddle block with a becket Made by Harken ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Vang Floating Block (x1) Sonar Lower...

The cup style mast step is easy to use and and has an oval shaped cup to make raking the mast easy. Simple rotating thumb screw and counter sunk screw in plate to mount to hull. Stainless steel construction Scale enables the sailor to recreate...