Batten Set for the RS Tera Pro Mainsail.

Plastic trapeze handle used for trapeze systems on the RS Quest. Can be used for many other pulling operations. 2.5mm hole at the top. Tap can be cut to create a bigger hole.

Spacer/Bushing used on various RS Sailing roto sailboats between the transom and the transom plate. The part number for the transom plate is QUE-HF-503.

Plastic push in 32mm tube end cap. Used on the RS Quest to plug the thru deck bushings on the transom. The part number for the thru deck bushings is RSM-HF-507.

Tiller Tube for the RS Quest.

US Specification Tiller Tube for the RS Quest.

Selden External T-Terminal Tang. Used on the RS Quest.

Spinnaker Pole Mast Fitting for the RS Quest. Used to attach the spinnaker pole on RS Quests using symettrical spinnakers. Secured to the lower mast using 3x rivets, whose part number is FIX-R48-M18. Also used on the RS800 boom for attaching mainsheet...

Bow Tube for the RS Quest Bow Sprit/Spinnaker Pole. Allows the Spinnaker Pole to be extended/retracted through the bow.

27mm Fairlead by Selden. Used on the RS Quest to fair the spinnaker halyard as it runs down the centerline between the two 30mm ball bearing blocks. The part number for the blocks is P403101SLC. These blocks are an optional upgrade on the RS Quest.

Transom plate for the RS Quest. Used for mounting the upper and lower gudgeons. The part numbers for the upper and lower gudgeons are C16-HF-502 and RSM-HF-506, respectively.

Top Mast (Black) for the RS Quest.

Forward Beam Assembly for the RS Quest. Includes mast step. Attaches using 2x screws and caps. The part numbers for the mast step, screws, and caps are QUE-HF-200, FIX-B6-P16, and QUE-FO-901, respectively.

Complete Mast for the RS Quest sailboat. Includes all standard mast fittings. Does not include standing or running rigging (such as halyards, shrouds, forestays, trapeze kits). RS Quest Mast with Fittings No Standing or Running Rigging OEM RS Part...

Mounting Plate for the Mainsheet Hoop when this is installed on the RS Quest. Two are needed to install the mainsheet hoop. Attach using 3x screws each, whose part number is FIX-B5-C12.

Hoop Blanking Caps for the RS Quest. Used to seal off the holes in the deck when the RS Quest does not have a mainsheet hoop installed. Attach using 2x screws, whose part number is FIX-B5-C12.