Foreguy shockcord for FJ spinnaker pole. Line: 5mm Shockcord Length: 15 feet

FJ centerboard downhaul, pre cut from 6mm shockcord to our recommended length of 3 feet. Helps keep the board in place. Line: 6mm Shockcord Length: 3 feet

Complete mast for 29er. Includes a pair of shrouds and 3 rope halyards. Manufactured by Ovington.    SPECIAL ORDER - Availability and Freight Shipping Information This item is classified as FREIGHT due to weight and/or length and is a...

Cunningham line for the Vanguard 15 sailboats, pre cut to our recommended length from a durable 5mm line for great performance. Line: 5mm Sirius 500 by Robline Length: 4 feet Typically cut from green / silver spool but exact color may vary Looking for...

Foreguy shockcord for 420 spinnaker set up pre cut to a recommended length from durable 5mm shockcord. Line: 5mm Shockcord Length: 8 feet

Replacement lower vang block for Laser® sailboats and ILCA dinghies. This 'jam' style block has a cleat for securing your vang line in the older 3:1 (sometimes called 'classic') vang assembly found on older boats. Not class legal for racing...

The Tasar Vang Tang mounts to the bottom of the lower mast section and accommodates two mounting locations for the vang blocks. Made of Stainless Steel Width: 44.5mm (1.75") Height: 38mm (1.5") Upper Tang Width: 19mm (.75") Lower Tang Width: 22mm (...

Shockcord retainer for 420 trapeze wire assembly. Secure ends to each trapeze handle, and run around the mast. Line: 5mm Shockcord Length: 11 fee

The horn cleat is perfect for tying off halyards securely. Used on a variety of small sailboats, including the Sunfish for securing the main halyard. 3-3/4 inch length. Black anodized aluminum. Commonly found on Sunfish deck for main halyard cleating.

6" inspection port from Beckson that allows you to gain access to the interior of the boat. The Beckson Screw-Out Plate incorporates a self-aligning center and an innovative gasket to assure a watertight seal. A patented back-up sealing wall leaves the...

Set of hiking straps for the 29er. Set of two straps, sewn in rear, loop on other end Length: 61 inches each Padded for comfort Made by Fast Canvas

Made from a lightweight yarn, these telltales are great to help with correct sail trim. Includes adhesive patches for installation on your sails. 100% wool yarn Adhesive application discs Resists hang ups and sticking 8" long Includes 7 Green and...

This mast up, mooring style Sunfish Deck Cover fits snugly below the rub rail of the hull to seal out dirt and water. This cover is installed with the mast up and the spars and sail down. This cover is held on by an elastic cord in the hem of the cover;...

Harken ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.. Height (mm)22 mm Height (in) 7/8 in Length...

These racing-style sprit pole ends are tougher for increased halyard tension. They fit into both ends of any 27mm BlackGold sprit pole. Fits all 27mm racing sprits Size based on OUTER DIAMETER of sprit pole Standard on BlackGold sprit

This attaches to the mast, creating an attachment point for the lower vang block. 1/4" Round Original Equipment Used on Sloop Mast 1/4 Round Vang Bail Zim Part # 20213 / Laser Performance Part # 90406 Compatible with both Zim and Laser...