The Laser / ILCA Vang Upper Block is a Harken wire block with becket with attached vang key. It features indented sides to prevent the line from slipping off the sheave. The included vang key is the latest 'updated' style with larger head for...

Padded hiking strap for FJ sailboats. Use two of these 28 inch straps in the AFT position of the FJ for the skipper. Sold individually. Padded hiking strap 28 inch length Sold individually 

Padded hiking strap for FJ sailboats. Use two of these 36 inch straps in the FORWARD position of the FJ for the crew. Sold individually. Padded hiking strap 36 inch length Sold individually 

Take care of your sails! The Rooster Sail Tidy will keep your sail secure without needing to crush it with ties or tape. This is the 'XL' and largest size version that is suitable for large fully battened dinghy main sails. 25cm x 30cm

16cm long sticker for the halyard and outhaul. Use this red version for club, silver, and quicksilver spar sets.

This sticker acts as a guide, allowing you to hoist and trim the sail to the proper level on an Optimist sailboat. Use Blue for Silver / Quicksilver Optimist masts Measures position of sail relative to the mast and boom

Complete FJ jib halyard assembly. Made from 3/32 inch wire with becket block nico pressed on one and and a snap shackle on the other. Halyard tail is 4mm line with Dyneema core for very low stretch. Includes Jib Wire and Halyard Line. Shackle and...

Standard horn cleat from Ronstan. 5 inch overall length designed for a max rope diameter of 1/4 inches. Made from a heavy duty UV stabalized nylon for long life and durability.

Standard horn cleat from Ronstan. 4 inch overall length designed for a max rope diameter of 3/16 inches. Made from a heavy duty UV stabalized nylon for long life and durability.

Standard horn cleat from Ronstan. 3 inch overall length designed for a max rope diameter of 5/32 inches. Made from a heavy duty UV stabalized nylon for long life and durability.

Stainless rudder retainer clip / lift stop for the Club 420 sailboat. Can also be used on FJ sailboats.

Replacement traveler block for ILCA sailboats. The small size traveler block connects to the large size trabeler block with integrated sister clips. This is the 'traveler' side of the set up. Pass your traveler line from one end of the transom, through...

Replacement traveler block for ILCA sailboats. The large size traveler block connects to the small size traveler block with integrated sister clips. This is the 'mainsheet side' of the traveler set up and is mounted at the top. Pass your mainsheet down...

The hiking strap plate is a small, flat plastic plate that is mounted over your hiking strap. Installed just forward of the cockpit wall and behind the mainsheet eyestrap. Can be used on any Laser sailboat or ILCA dinghy.

Padded hiking strap for ILCA sailboats from Hyde. 

Replacement ILCA Vang Tang. This stainless steel vang tang is used to connect the lower vang block to mast. Installs with rivets and compatible with all size ILCA lower mast sections and all existing boom vang assemblies that connect with a pin...