FJ Parts

This fast pin is used to attach the tack of the main sail to the boom on boats like the C420, FJ, and Vanguard 15. Can also be used on other boats or other applications.  Pin Only Stainless Steel construction Secure Under Load Easily Secures 1/4...

The mast heave sheave allows the main halyard to run smoothly through the mast head. It spins enabling the halyard to be adjusted easily. White Plastic Works on 420, FJ, and V-15 sailboats Zim Part # 20262 / Laser Performance Part # 90579 Compatible...

Zim Sailing has developed a new aluminum tiller for Cal Style CFJ sailboats that is now class approved! The plastic wedge makes our CFJ tiller compatible with a wide range of rudder heads for CFJs from different builders and different years. Say goodbye...

This strong alloy clam ('jam') cleat is perfect for a variety of applications from halyards to travelers to control lines. Integrated fairlead guides line into cleat Mounts easily to flat or curved surfaces Suitable for use with 3mm to 6mm lines...

Pre cut vang line for FJ sailboat. Line: 5mm FSE Sirius Length: 14 Feet(Quantity 1 = 14 foot length) Typically cut from red/silver spool, but exact color may vary Looking for another color or want to specify a different length? Check out the 5mm...

These spreader airfoils are aerodynamically shaped to hold the shrouds. Sold in a set of 2 spreaders and designed for both Club 420 and FJ masts. 16 inch long Aluminum construction Works on both Club 420 and FJ masts for LP and Zim boats Sold as a set...

Pintles are mounted to the transom to accept the gudgeon from a rudder assembly. Use this pintle in the lower position on either FJ or C420 sailboats from Vanguard, LaserPerformance, or Zim Sailing that have a 4 hole mounting pattern. 4 Hole Pattern...

Standard drain plug fitting from Beckson. Complete assembly with screw-in plug and housing, with 1 inch plug hole diameter and 1.5 inch mounting hole spacing for drain plug housing. Plastic keeper helps prevent the plug from falling out of the housing...

Mid tie for the FJ Hiking Strap set up, used in the center of the boat. Order two for a full boat. Line: 5mm Robline Sirius 500 line Length: 5 feet (Quantity 1 = 5 foot length) Typically cut from black/silver spool, but exact color may...

FJ jib halyard tail. This line is used along with the standard jib wire halyard. Line: 6mm Pre-Stretch Length: 16 Feet

The Tiller Joint Universal connects a tiller extension with a tiller. The flexible rubber allows for a full range of motion with the tiller extension. New tiller extensions come with a joint universal, so you can use this one to replace one that has...

Use these fabric tell tales to ensure correct sail trim. Made from rip stop fabric for durability. Adhesive patches are included for installation on your sail. 3 Green 3 Red Fabric tell tales

This shackle is used primarily to attach jib halyard to head of jib sail on 420, FJ, and V15. Supplied by Zim Sailing. Captive locking pin Easy twist and release Part Number 20030 Previous LP Part Number 90570 One Design...

Aft tie for the skipper position in the FJ. Order two for a full boat. Line: 5mm Robline Sirius 500 line Length: 3.5 feet (Quantity 1 = 3.5 foot length) Typically cut from black/silver spool, but exact color may vary Looking for another color or want...

The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This is a great cleat for spinnaker sheets on smaller sailboats. Notched cutout on port side of cleat. Lightweight Aluminum construction Mounts easily to deck Notched...

Upgrade your FJ Main halyard with this 38 foot pre cut pre-stretch line for great performance. Line: 6mm Marlow Pre-Stetch Length: 38 Feet