The grey racing mast collar is slightly oval to allow for mast rake adjustment. Included inner sleeve that fits around mast to prevent wear. Countersunk mounting holes Grey color 57mm outside diameter of collar 45mm inside diameter of sleeve

Main Halyard line for 420 sailboats, pre cut to a recommended length from a durable and low stretch 6mm line for great performance. Upgrade your main halyard today! Line: 6mm Marlow Pre-Stretch Length: 40 feet

Mounted to the stern of the boat, this piece is where the rudder is then mounted to the boat. Stainless steel single gudgeon

An Optimist mast tie down line is important for keeping the rig in place in the event of a capsize (and for avoiding expensive repairs). Pre cut to our recommended length from a super low stretch and small diameter line for great performance. Keep a...

FJ Centerboard gasket with 40 inch stripping to keep water out. Gasket stripping for FJ centerboard trunk. 40 inch length. Zim Part # 20382 / Laser Performance Part # 85049 Compatible with both Zim and Laser Performance boats Installation...

Take the hassle out of rigging and de-rigging your boat. Replace 3/16" and 1/4" clevis pins that use ring dings with easy-to-use push button pins. These "Œquick pins" are usable in a variety of places on your boat and will not work free by...

SCREW 1/4-20 X 1" RHMS-PH SS from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Complete batten set for 420 main sail. Includes 3x lower battens and 1x top 'compression' batten with black adjustable batten tip. C420 class battens Zim Part # 20274 / Laser Performance Part # 95860 Compatible with both Zim and Laser Performance...

Vang strut tube for the 29er with mast and boom end fittings. Does not include Vang Shoe.

This fitting is used for the boom vang on Club booms. It comes with a rivet. Boom button to hold vang in place. Used on Optiparts Club booms. Includes rivet for easy install.

Hobie kayak hatch latch kit. This is the adjustable style hatch latch.   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites,...

The lance cleat utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. Just slide the rope sideways and it runs freely in the fairlead, which has a colored roller incorporated in the top for easier sheeting and...

Lower roller unit of the traveler car assembly found on Hobie 14 and Hobie 16 catamarans built before 1994. This is a replacement lower roller unit for the Hobie Traveler Car Assembly (Old Style), part number 105. Lower roller unit of the main traveler...

The Tasar Whisker Pole Eyestrap mounts to the mast end of the boom and holds the whisker pole in place when not in use. Made of Stainless Steel Stamped shape mounts flush to boom Height: 1" Distance between rivet holes: 2-3/8" Fastener Size: #10

Shockcord section for middle of FJ which helps keep the strap off the deck. Order two for a full boat. Line: 6mm Shockcord Length: 2.5 feet