Starboard (right) corner casting for the rear crossbar of the Hobie 14 and 16. Anodized aluminum alloy. Fits Hobie 16 and Hobie 14   RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Standard Getaway trampoline in Turquoise from Hobie Cat. Standard two piece tramp in heavy duty mesh that doesn't puddle. Includes heat welded seams that last much longer than any stitched seam tramp. Manufactured by Hobie Cat and designed to work with...

Replacement rudder lift stop for Laser sailboats and ILCA dinghies. This stainless steel tang keeps your rudder in place during a capsize and is commonly installed between the two gudgeons, with the tab racing down. Stainless steel Installed in line...

Take the hassle out of rigging and de-rigging your boat. Replace 3/16 inch and 1/4 inch clevis pins that use ring dings with easy-to-use push button pins. These quick pins are usable in a variety of places on your boat and will not work free by...

Lower gudgeon for the 29er transom. This is the old style for pre 2020 boats with old rudder stock style. Lower and upper gudgeons sold separately Manufactured by Ovington Boats

The vang wedge allows for the appropriate cleating angle for the split lead Tasar vang Newly redesigned in 2009 Made from solid delrin Class legal

40mm Carbo Fiddle Block from Harken. 40mm Fiddle block with a becket Made by Harken ONE DESIGN APPLICATIONS This fitting is commonly used and/or recommended for the following one design sailboat applications: J/22 Vang Floating Block (x1) Sonar Lower...

The cup style mast step is easy to use and and has an oval shaped cup to make raking the mast easy. Simple rotating thumb screw and counter sunk screw in plate to mount to hull. Stainless steel construction Scale enables the sailor to recreate...

Foreguy shockcord for FJ spinnaker pole. Line: 5mm Shockcord Length: 15 feet

FJ centerboard downhaul, pre cut from 6mm shockcord to our recommended length of 3 feet. Helps keep the board in place. Line: 6mm Shockcord Length: 3 feet

Complete mast for 29er. Includes a pair of shrouds and 3 rope halyards. Manufactured by Ovington.    SPECIAL ORDER - Availability and Freight Shipping Information This item is classified as FREIGHT due to weight and/or length and is a...

3/32 wire sleeve stop from Hobie Cat. RESOURCES & SUPPORT Hobie Cat Parts Locators Hobie Cat Rigging Guides Shop All Hobie Cat Parts

Cunningham line for the Vanguard 15 sailboats, pre cut to our recommended length from a durable 5mm line for great performance. Line: 5mm Sirius 500 by Robline Length: 4 feet Typically cut from green / silver spool but exact color may vary Looking for...

Foreguy shockcord for 420 spinnaker set up pre cut to a recommended length from durable 5mm shockcord. Line: 5mm Shockcord Length: 8 feet

Replacement lower vang block for Laser® sailboats and ILCA dinghies. This 'jam' style block has a cleat for securing your vang line in the older 3:1 (sometimes called 'classic') vang assembly found on older boats. Not class legal for racing...

The Tasar Vang Tang mounts to the bottom of the lower mast section and accommodates two mounting locations for the vang blocks. Made of Stainless Steel Width: 44.5mm (1.75") Height: 38mm (1.5") Upper Tang Width: 19mm (.75") Lower Tang Width: 22mm (...