27mm Fairlead by Selden. Used on the RS Quest to fair the spinnaker halyard as it runs down the centerline between the two 30mm ball bearing blocks. The part number for the blocks is P403101SLC. These blocks are an optional upgrade on the RS Quest.

27mm Cam Cleat by Selden. Used on the RS Quest to secure the spinnaker sheet, and spinnaker halyard, among other applications.

45mm Auto Ratchet Block used for the Spinnaker Sheet on the RS Quest. Attaches to the Shroud Eye Bolt using a D Shackle. The part numbers for the eye bolt and shackle are QUE-HF-304 and A-621104, respectively. The sheave automatically changes from...

Transom plate for the RS Quest. Used for mounting the upper and lower gudgeons. The part numbers for the upper and lower gudgeons are C16-HF-502 and RSM-HF-506, respectively.

Rudder Blade for the RS Quest. Blade only, purchase blade top and blade bottom tip separately. The part numbers for the blade top and bottom tip are RSM-FO-912 and RSM-FO-909, respectively.

Reefing hook used to secure the tack of the RS Quest Mainsail. Used in reefing the mainsail. Attaches to the gooseneck whose part number is 509-081-01.

Outboard Motor Mounting Plate for the RS Quest. Made by RS Sailing. Part Number QUE-UA-103

Pair of mast head shims and 8 rivets used to secure them to the mast for the RS Quest. Shims serve as the anchor surface for attaching the masthead float brackets, whose part number is RSM-SP-911.

Top Mast (Black) for the RS Quest.

Mast Foot/Plug for the RS Quest. Includes upgraded pivot pin. Connects the bottom of the RS Quest mast to the mast step, whose part number is QUE-HF-200.

Pivot Pin for the RS Quest Mast Step. Use with RS Quest Mast Plug/Foot, whose part number is QUE-SP-904.

Forward Beam Assembly for the RS Quest. Includes mast step. Attaches using 2x screws and caps. The part numbers for the mast step, screws, and caps are QUE-HF-200, FIX-B6-P16, and QUE-FO-901, respectively.

Mast Step for the RS Quest. Attaches to the Beam Assembly using 2x rivets. The part numbers for the Beam Assembly and rivets are QUE-HF-105 and FIX-R64-M18, respectively.

Masthead Float kit for the RS Quest from RS Sailing. Add peace of mind with a mast float to help keep the top of the mast above water in the event of a capsize. Sold Mast Flat Includes mounting brackets 14L Capacity Also works on the RS Cat 16 and RS...

Complete Mast for the RS Quest sailboat. Includes all standard mast fittings. Does not include standing or running rigging (such as halyards, shrouds, forestays, trapeze kits). RS Quest Mast with Fittings No Standing or Running Rigging OEM RS Part...

Kit for upgrading the RS Quest Mainsheet Base to a Swivel Base with cam cleat. The kit includes the 4x screws and cable ties needed to install the upgrade. This kit can also be used on the RS Toura. Instructions for installation