Returns/Exchanges for Holiday orders accepted through end of January! More info -->HOLIDAY RETURNS
Parts & Accessories for Thistle Sailboats
West Coast Sailing is your source for Thistle sailboat parts and accessories. he Thistle is a high-performance one-design racing boat that can also be used for daysailing. Designed in 1945, the Thistle has been carefully modernized to reflect new technologies while keeping all boats competitive. It carries a lot of sail for its size, planing easily in 10-12 knots of wind. The sail plan consists of a main, jib, and spinnaker. This family-friendly boat features a plumb bow, straight sheer, thin rails and no decking. The rounded bottom provides stability, making it ideal for beginners. It’s usually raced with a three-person crew.
Use the diagram below to reference Harken part numbers to appropriate application on your Thistle sailboat. Parts recommendations are offered as a guide for common applications.
To control the big main, skippers use two 40 mm Carbo® singles on the boom and one on the traveler car. Some skippers like to cleat the mainsheet and bolt a swivel base with a 57 mm ratchet block to the end of the centerboard cap. To help with getting the boom across quicker, a jibing line is attached to the boom at the same location as the forward block. When it comes time to jibe, the skipper pulls the jibing line across instead of pulling in yards of mainsheet.
All Thistles must have a traveler track across the top of the transom. Use a low-beam Small Boat track with a car and a 40 mm Carbo block shackled to the car. Some boats opt to not use a traveler on that track and instead bolt a 40 mm Carbo single stand-up block in the middle. The control lines are led outboard and turn forward to 29 mm Carbo cheek blocks and micro cams with fairlead covers. The advantage of using a traveler is the ability to bring the car above centerline while sailing upwind and easing the main to centerline to induce vertical twist that is fast in choppy conditions.
Each crew gets their own hiking strap. Being able to adjust the strap length helps the crew keep the boat flat and keep themselves from dragging in the water. The crew uses looser straps while sailing up wind to hike hard and stay out of the helmsman's sight lines, while the boat is heeling over. They use tighter straps when reaching to make moving in and out easier.
Diagram provided by Harken. West Coast Sailing is an approved seller of Harken sailboat hardware.
Product Suggestions - If you're looking for a specific part for your Thistle sailboat that you cannot find, let us know. We are actively working to expand our one design parts offering and welcome your input for parts you think we should be stocking to make it easier for you to get back out on the water. Submit you idea via our Product Suggestion Form (opens in new tab).