Browse top line recommendations for sailboat mainsheets, jib sheets, spinnaker sheets, and more for dinghies, sportboats, and keelboats.
Sheets control trim of sails such as the mainsail, jib, and spinnaker. Browse top line recommendations for sailboat mainsheets, jib sheets, spinnaker sheets, and more. Check out performance favorites such as Dinghy Sheet XL, Rooster Polilite, Coppa 500, and Samson Ultra-Lite and reliable options such as Marlow Double Braid and Orion 300. Whether you need a new Laser mainsheet, spinnaker sheets for your cruising boat, or jibsheets for your sportboat, we offer a selection of the industry's best sailing line from top brands you can trust.
|Dinghy / Small Boat Recreational||
8mm Robline Orion 500
6-8mm New England Ropes Bzzz
6mm-12mm Marlow DoubleBraid
|Dinghy / Small Boat Performance||
6mm-7mm Rooster Polilite
6mm-8mm Dinghy Sheet XL
|Keelboat / Cruising Recreational||
6mm-12mm Marlow DoubleBraid
9mm Top Cruiser Kmix
10mm-11mm Robline Orion 300
|Keelboat / Cruising Performance||
6mm-8mm Samson Ultra-Lite
5.5mm-9mm Coppa 5000
If you are replacing an existing line, the easiest way to determine what diameter you need is to match what you already have. This can be done with a caliper or by close estimation with a tape measure. If you've previously used a 7mm sheet and it has performed well, another 7mm line is likely a great choice. In most applications, there is some flexibility in the exact diameter that can be used. Most blocks, for example, have an 'ideal' diameter (ie, the line diameter that runs most effectively though the block's sheave) but also have a range so that you can run a slightly thinner or slightly thicker line. If you have a sheet that is getting hung up in your rig, stepping down 1-2mm might help the sheet run more efficiently. If you have a larger boat or rig and want to run a thinner sheet, consider a double braid line that features a Dyneema or spectra core for strength.
1mm = 3/64 inch | 2mm = 5/64 inch | 3mm = 1/8 inch
4mm = 5/32 inch | 5mm = 3/16 inch | 6mm = 1/4 inch
7mm = 9/32 inch | 8mm = 5/16 inch | 9mm = 3/8 inch
10mm = 25/64 in | 11mm = 7/16 in | 12mm = 1/2 in
Two terms you will often see in line descriptions are 'double braid' and 'single braid', which refer to the way the line is constructed. At the most basic level, a double braid line has a cover and a core whereas a single braid does not, but there are other important distinctions to consider when making a line selection.
Single Braids are made up of either 8 or 12 strands that are braided into a circular pattern, half clockwise and half counter clockwise. This produces a line that is supple, absorbs twists, and tends not to kink. There are two types of single braid lines: performance single braids and polyester/blended single braids. Performance single braids are made from fibers with very low stretch and designed to handle extreme loads - think Dyneema, Spectra, or Vectran. Polyester/blended single braids, sometimes called hollow braid, are soft and easy to grip, built for sheets and hand-adjusted control lines. These are less common than performance single braid lines but recommended in a few specific applications.
Double Braids, sometimes called braid on braid, have a braided core within a braided outer jacket or cover. This creates a strong, durable, smooth-running line that is easy to handle. Double braids are used for the vast majority of all running rigging on sailboats including sheets, halyards and control lines for both cruising or racing. There are two types to consider: polyester double braids and high-tech double braids. Polyester double braids, found most commonly on recreational and cruising sailboats, have a polyester cover with polyester core. These are low maintenance, affordable, and long-lasting, while offering relatively low stretch and high working loads. For additional strength and minimal stretch, consider high-tech double braids. These lines typically feature a Dyneema or Spectra core (non-stretch) inside a polyester or polyester/dyneema blend cover for additional durability. They are more expensive but often the go to choice for high performance racing boats.
For control lines, the exact choice can vary based on preference and type of boat sailed, but typically we recommend a standard single braid (soft hand, great for mainsheets on smaller boats!) or a double braid polyester or double braid high tech line.
Looking to clean up the end of your line or need to add a splice to your rig? Visit our Whipping & Splicing page for a full selection of whipping twine, fids, splicing needles, and complete splicing kits. Perfect for the DIY sailor looking to further optimize their rigging.