One Design Rigging

The Laser / ILCA Outhaul Mast Loop w/ Block (Double Block) features two Harken T18 block spliced to Dyneema with an eye in the other end. Simply wrap the line around the mast and past the blocks through the eye - easy to use whether the sail is up or...

Our Club 420 Spinnaker Sheets are made with both ends whipped for durability. We recommend using Samson Ultra Lite line which is low stretch, has excellent strength, and even floats. This is the 6mm / 1/4 option for those who prefer a slightly heavier...

This is a mid performance J/24 Main Halyard, complete with a Wichard halyard shackle on one end and a reeving eye on the tail for easy installation. This option features New England Ropes Sta-Set, a mid range line with polyester core and cover for...

Specially made by the West Coast Sailing Rigging Department for the top Optimist competitor, this is the ultimate mainsheet block and clip. Made from a Harken 40mm Carbo block (H2650), custom Samson Amsteel pendant reinforced with cover at the block head...

This is a high performance spinnaker sheet line for the Thistle sailboat. Developed in coordination with Thistle class experts, this is a continuous sheet, with the center running through the boat and the ends attached to the sail. Our 6mm SSR version is...

This is a high performance mainsheet line for the Thistle sailboat made from Alpha SSR, a single braid Dyneema SK-75 and Cordura blend line. Developed in coordination with Thistle class experts, this mainsheet is 8mm diameter and cut to a class...

If you're serious about racing a Club 420, this is the jib halyard package you'll want. The West Coast Sailing C420 Jib Halyard Complete fully replaces the wire in the jib halyard system with super-strong and lightweight 2.7mm Samson Amsteel Dyneema...

The Melges 24 Spinnaker Halyards are available both tapered or Non-tapered. This tapered version has a reeving splice on one end (for easy install to a clutch/cleat) and is tapered/buried on the other end (spinnaker head) with an end whip for...

Jib Halyard for the J/24 with snap shackle spliced at the working end for easily connecting to your sail, and have a reeving eye on the tail for easy installation. This option features New England Ropes Sta-Set, a mid range line with polyester...

Upgrade your J/24 with a new Topping Lift from the West Coast Sailing Rig Shop. Starting with a high performance Admiral 5000 line from Robline, a dependable option with Dyneema SK78 core and 24 Plait Polyester cover, we add a 3 inch Wichard Springless...

Our Melges 24 Furler Line is whipped on both ends for durability and cut to the perfect length for your furling system. Made from Marlow Super Pre-Stretch, 100% polyester single braid line that is pre-stretched to improve strength and reduce elongation ...

Tapered cunningham primary line for the RS Aero, built to the same specification as the lines included in new boat rig kits. Made from 4mm Kingfisher Evo Race78 for top performance.  West Coast Sailing Rig ShopThis item is hand built by our Rig...

Our J/22 mainsheets are the perfect length for your boat and feature whips on both end for a clean finish. This option is made from Robline Racing Pro, a 12 strand single braid line made with a high tech mix of Dyneema and Technora fibers for...

Jib Halyard for the J/24 with a snap shackle spliced at the working end for easily connecting to your sail, and have a reeving eye on the tail for easy installation. This halyard is made from 6mm Marlow Excel racing which features a color matched...

This is our most basic J/24 Spinnaker Halyard and a great budget/economy option. Designed to be cleated at the mast (as opposed to run aft to the cabin top), this halyard is tied on to the spinnaker (no shackle) and whipped at both ends for durability...

A performance option for our Melges 24 Tack Line, this version is tapered to reduce weight and increase efficiency. We taper the Admiral 5000 line to remove the 24-plair cover and expose the Dyneema SK-78 core in the forward part of the tack line. The...